[Thatluckytriple7]

No need to replace the hose just break the glue around the original hose that attaches to the air box. Pull the hose out of the air box and you will notice it has a lip on the end which is perfect then go buy a filter with I think a 2 inch diameter make sure the lip slides in the filter and whalaa.

 

[Thatluckytriple7]

****... thought about that the other day, but i was to lazy to pull the box... looks awesome, nice job!

Looks really nice sticking out from behind the panel and yes it adds quite a bit of noise but it sounds good.

 

[Thatluckytriple7]

Is that the 6" or 4" uni air filter? Any noticeable difference in acceleration?

It's the 4 inch. And yes I have. Quite a bit for a $20 upgrade. I would not get the 6 inch though the six would stick out to far.

 

[Thatluckytriple7]

Got a pic and part number?

I posted pictures and a how to in the earlier posts and someone else posted a link to the filter

 

[Thatluckytriple7]

so you kept the same intake hole on the other end of the air box
the tiny one
or did you enlarge it

I ripped off the whole air box and just left the hose from the throttle body. Placed a cone filter on the end of it.

 

[Thatluckytriple7]

oh ok
thought you sealed it back up


I almost want to try to rig up my stock box but use the intake I have so it will flow the same but muffle the noise
its way to loud thats all I hear even with the aftermarket exhaust

Yeah it is quite a. Bit louder for sure.