Kawasaki Z125 Forum banner

Wont Shift after Clutch Replacement.

149 Views 2 Replies 2 Participants Last post by  UglyEddie
Just Changed my clutch and adjusted it, went to test ride the bike,.

Won't shift up to 2nd. I have to get off the bike while in 1st and I have pull the shifter up to neutral by hand.
Everything is torqued to spec.
Did I do something wrong?! 馃
1 - 3 of 3 Posts
Make sure your lightly rolling bike back and forth while shifting

Double check this procedure and see if anything might be why

If you did lay the bike over on the shifter side for any reason while the clutch cover was off check this

Font Engineering Machine Machine tool Titanium
See less See more
Make sure your lightly rolling bike back and forth while shifting

Double check this procedure and see if anything might be why

If you did lay the bike over on the shifter side for any reason while the clutch cover was off check this

View attachment 27775


I fixed it. Had to adjust the cable. Thank you for the Notes. Definitely something I would keep for future references.
  • Like
Reactions: 1
1 - 3 of 3 Posts
Top