[HardRacing]

.


Slowly but surely these parts are coming.

We've got some added to our site with more on the way.


>> TAKEGAWA PARTS PAGE <<

Takegawa Super Oil Pump
- Increase Oil Flow by approx. 30% .
- A larger amount of oil is circulated , reduces the burden parts of improvement and lubrication of the cooling performance .
Translation, More engine protection. Cooler running motor.
01-16-0003

 

[HardRacing]

TAKEGAWA CLUTCH COVER - Cable Type

TAKEGAWA CLUTCH COVER - Cable Type
02-01-0152




.

 

[HardRacing]

TAKEGAWA CLUTCH COVER - Hydraulic Type

TAKEGAWA CLUTCH COVER - Hydraulic Type
02-01-0154








.

 

[HardRacing]

TAKEGAWA CABLE CLUTCH COVER UPGRADE KIT

TAKEGAWA CABLE CLUTCH COVER UPGRADE KIT
02-01-0382






.

 

[HardRacing]

TAKEGAWA HYDRAULIC CLUTCH COVER UPGRADE KIT

TAKEGAWA HYDRAULIC CLUTCH COVER UPGRADE KIT
02-01-0383






.

 

[HardRacing]

Takegawa Oil Coolers

Takegawa Oil Coolers For Z125
07-07-0217 , 07-07-0218, 07-07-0219 , 07-07-0220






.

 

[HardRacing]

.



Takegawa Fork Pre-Load Adjusters

Takegawa Fork Pre-Load Adjusters 02-01-0383






.

 

[Bludc2]

Some nice looking good parts right there!

 

[Ninja]

That oil cooler looks really nice

 

[HardRacing]

That oil cooler looks really nice

.


Takegawa definitely, makes really nice products.

.

 

[McGovZ125]

Where's the drool emoticon???

 

[flying dave]

I think I am going to like Christmas this year....

 

[Zmike125]

will the oil cooler bolt up to the stock engine cover
since it looks like we have an oil line you can remove and use a cooler on

 

[HardRacing]

will the oil cooler bolt up to the stock engine cover
since it looks like we have an oil line you can remove and use a cooler on

.


Yea, they actually have some really clever designs.

So there are 4 oil coolers.

1) For STOCK Head Mounting brackets......... and Oil Lines that feed off an included adapter that goes behind the oil cartridge cover.

1) For STOCK Head Mounting brackets......... and Oil Lines that feed off their Clutch Cover.

1) For 4v SUPER Head BBK Mounting brackets......... and Oil Lines that feed off an included adapter that goes behind the oil cartridge cover.


1) For 4v SUPER Head BBK Mounting brackets......... and Oil Lines that feed off their Clutch Cover.

of course, the last two........... will be for their upcoming 4v Super head BBK ............. releasing soon.

.

 

[Zmike125]

yeah I looked at the website

too pricey for me
$400 for an oil cooler

pretty sure for my lifan type honda clone engines I had paid $150 for a complete cooler setup with adapter plate and 3-4 level cooler

but so far thats the only one I've seen hopefully there will be cheaper ones in the future

 

[HardRacing]

yeah I looked at the website

too pricey for me
$400 for an oil cooler

pretty sure for my lifan type honda clone engines I had paid $150 for a complete cooler setup with adapter plate and 3-4 level cooler

but so far thats the only one I've seen hopefully there will be cheaper ones in the future

.


Yea, unfortunately, the Japanese Yen has gained nearly 25% value on the USD in the past 6 months, so all the prices have gone up.. and will most likely continue to go up. :frown2:


.

 

[HardRacing]

.

Just got a large shipment of Z125 Oil Coolers, Oil Pumps, Fork Spring PRE-LOAD adjusters and more.

Most of the order was pre-sold, but we still have some of each left in stock.




.

 

[HardRacing]

.



.