[Goat]

Anyone install these on the OEM throttle tube? Mine fit a little wonky.

 

[Goat]

The stock grips have slots in them to coorespond to the tabs on the tube. I just buttedthese up against the tabs because they don'thave the slots and make a hump in the grip if over the tabs.

 

[itsmattylove]

I sanded the tabs down so they'd only stick up a little. Sprayed some hairspray, slid them on and let it sit. If you do that just be careful not to sand the guide that the cable goes into

 

[z125minibike]

i did the same thing. get out your dremel sand them down a little bit and the grips slide right no