Kawasaki Z125 Forum banner

1 - 5 of 5 Posts

·
Junior Member
Joined
·
447 Posts
Discussion Starter #1
UPGRADED STIFFER FORK SPRINGS for your Honda Grom or Z125 PRO. MADE BY OHLINS.

If you are on a budget, and cannot afford the complete Fork Kit..... , then at least installing these Stiffer Fork Springs, will help from bottoming out. Specially if you like to Stunt, pull stoppies, or just don't want the front end to bottom out all the time.


Click here to order : >> OHLINS STIFFER SPRINGS <<


 

·
Registered
Joined
·
73 Posts
UPGRADED STIFFER FORK SPRINGS for your Honda Grom or Z125 PRO. MADE BY OHLINS.

If you are on a budget, and cannot afford the complete Fork Kit..... , then at least installing these Stiffer Fork Springs, will help from bottoming out. Specially if you like to Stunt, pull stoppies, or just don't want the front end to bottom out all the time.


Click here to order : >> OHLINS STIFFER SPRINGS <<


I agree 100% and would also like to add in that the extra stiffness will drastically improve stability while under heavy braking up front. You can never be too prepared for the idiot drivers out there!! :surprise:
 

·
Registered
Joined
·
563 Posts
Could be a good option for some people.

What weight of a rider (at the track with hard braking would you say this is optimal for?
 

·
Junior Member
Joined
·
447 Posts
Discussion Starter #4
Could be a good option for some people.

What weight of a rider (at the track with hard braking would you say this is optimal for?
.


160-195 range.

But honestly, anything is FAR Superior to the Stock springs that are in there now. :wink2:


.
 

·
Junior Member
Joined
·
447 Posts
Discussion Starter #5
.


Back in stock

.
 
1 - 5 of 5 Posts
Top