After months in the works, our proven Grom performer is now available for the Z. Tuned length, tapered, MNNTHBX proprietary silicone runner provided cooler intake temps and less vibration, and is paired with the highest quality filter on the market. Includes powdered bracket and stainless hardware, all of it made in the USA. Substantial bolt on performance. $99 at www.mnnthbx.com with optional shroud braced available shortly.
Ari Henning just popped a Mtake and Bazzaz on the Z, and found the power he was looking for. This, after the weaker midrange of the cam, and he's yet to move off the base Bazzaz map. Once he adds the AFM and can build maps for that set-up, he'll be grinning ear to ear.... http://www.motorcyclistonline.com/2...i-fuel-controller-install-and-dyno-test-video
Not yet, but they're coming. In fact, Ari Henning is about to dyno it hisself. On the Grom, we made 40%+ more power on the pipe/Bazzaz/Mtake/cam, and the Mtake was a big part of that...
We'll do a video next week, though it's so easy it hardly needs one. The gains are very impressive, but I'll leave it at that until I have real numbers, which we will before long. Optional shroud braces are about 10 days away.
NO CHANCE. This is a bit better quality than the K&N, made exclusively for us by the nation's premier cold air intake company. The day it becomes too restrictive for you, let me know, and I'll buy it back from you, but I assure you it flows 4x more than any Z will ever require...
Ari Henning just popped a Mtake and Bazzaz on the Z, and found the power he was looking for. This, after the weaker midrange of the cam, and he's yet to move off the base Bazzaz map. Once he adds the AFM and can build maps for that set-up, he'll be grinning ear to ear.... Kawasaki Z125 Pro MNNTHBX Intake and Bazzaz ZFi Fuel Controller | Motorcyclist
Can't wait till I order mine in a few weeks. Quick question though, will I need a fuel controller for just the intake? I won't have the money to put an exhaust on probably until next year but would like to pick up some power. Basically I just want to make sure that I won't tear anything if I run it for a couple months until it goes away for winter storage.
This is a good question. I am guessing that the stock fueling will be too lean once adding Mtake ( with or w/o exhaust ) thus requiring you to get the bazzaz Z-fi or the PCV. But as I said, that is a guess.
It would be sweet if someone could answer for certain if you could safely get away with the Mtake only. Keeping stock/factory exhaust and fuel delivery while not damaging the engine.
Many have / will run just an intake, or just an exhaust without a tuner, and will see gains, if minimal. If you do both, you're pushing the limit of what the bike will want. The Bazzaz, allows you to see the full potential of any aftermarket product, and it's those complete combos that make REALLY impressive power.
Just installed my MTake. No Fuel controller or Exhaust yet. The results? It's a lot louder, lost about 4 mph off the top end but gained some in mid-range power. The Z125 will now run 57 mph consistently, even on uphill grades. Tops out at about 60 mph now. Even with losing top end speed, I'm happy.
Bazzaz next for sure. Your top speed loss isn't an effect of the Mtake, it's an effect of being lean, which will only be made worse w/ an exhaust and no tuner. Add the Bazzaz, and you'll gain your 4mph back, plus a few extras...
^^listen to this man. I've got a full setup( intake, full exhaust and Bazzaz) and the FC is what took the chains off and really opened things up. Get a Bazzaz! Now let's see those Maps!! J/k. I know y'all are hard at work. I'm just impatient.
Just installed mine. It's a great looking piece and install was very simple. Great service from MNNTHBX and a great product. Installed the Mtake with a Yoshi pipe and a bazzaz tuner. It made a huge difference in the bikes performance. I'm very satisfied.
I'm saving my pennies, going to wait until I can get the Bazzaz with a preloaded map from MNNTHBX, and purchase that along with the Mtake (with shroud brackets) and Yosh exhaust. Looking forward to it. Although, I won't be able to use it in the stock 100 class at minigp, lol. F1 class it is! At least I think not. Whatever!!
If you bought a Bazzaz from us, and want to test our initial Yosh / Mtake map, hit us up through MNNTHBX - Enter We'll continue to refine this map and create others, but you'll find this a solid starting point for sure.
OMG, that carbon fiber shroud brace is awesome! And I'm glad you're offering a little filter for the crankcase breather hose! That other cover, that just goes over the filter that comes with your Mtake to keep water out?
Woooooohooooo, looks amazing, and I'll bet it gives good gains. Gotta save, so it may be a winter project, but looking forward to getting the Yosh pipe, Mtake, Bazzaz with your map for the 2 aforementioned pieces, and the shroud.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Kawasaki Z125 Forum
30.7K posts
5K members
Since 2015
A forum community dedicated to Kawasaki Z125 motorcycle owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, riding gear, troubleshooting, maintenance, and more!