Kawasaki Z125 Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
145 Posts
Discussion Starter #1
Installed an adjustable relay and the fronts were working OK. After installing the rear leds, they all come on, but will not flash. Fuses check out ok.
 

·
Registered
Joined
·
9 Posts
what adjustable relay?
Only one Ive found that works is the one from TST
Since this thread has been dead since January and OP never got a response I thought I might add my experience.


I purchased a adjustable unit from amazon and it works. I followed the TST video and unpinned the Orange wire on the harness next to the steering column behind the headlight. After I unpinned I cut off the stock clips and put female spade connectors on, so I can plug it straight onto the relay I purchased off amazon.

Because I am new I can't link yet but if you search "AUDEW 2-Pin Electronic Turn Signal Flasher Relay Fix Motorcycle Turn Signal Hyper Flash" it is the orange one.
 

·
Registered
Joined
·
20 Posts
I ordered that exact one. Also did the orange wire. Didnt work. That's crazy. Maybe I wasnt waiting long enough when adjusting the pot?
 
1 - 10 of 10 Posts
Top