[Urbestfriend]

I am going to install a Carchet Flasher for my Brake Light. If you remove the seat, about halfway on the Left side you'll find a black connector with 3 Wires coming out of it. A Red, Blue and Black. Using a VOM, the black wire powers the Tailight. However I can't seem to get any reading out of the Red or Blue. Can anyone help me ?

 

[TSTAgent]

On your bikes side of the connection, brown is running light, blue is brake function, black/white is ground. The wires on the OEM tail light will plug into those wires meaning red=running, blue=brake, black=ground.

Hope this helps!

On another note our tail light has the brake flasher program built-in and is completely plug-and-play!

 

[Urbestfriend]

Thanks...Mounted Optronics LED (15" lg. and 1 1/2" High) just above rear turn signals and below the Tail light.

 

[TSTAgent]

Thanks...Mounted Optronics LED (15" lg. and 1 1/2" High) just above rear turn signals and below the Tail light.

Nice! I'm sure that will get the attention of people behind you! :smile2: