[Greengoblin]

Does anyone know a specific brand that will work on our bike?

It just seems that when I look at the front stand our forks are small and will go through a regular motorcycle front stand.

 

[schleppy]

I haven't looked yet, but we may have to use a "stem stand" for the little Z. Something like this:
https://www.amazon.com/dp/B0071EEAS6?tag=

...the pin goes into the hole underneath the triple tree. This type of stand also lets you pull the front wheel off and keep the bike lifted.

 

[Greengoblin]

Thank you so much. This is a much better idea.
I have a quick question though. Is it safe for the bearings to put pressure on that stem?

 

[schleppy]

Thank you so much. This is a much better idea.
I have a quick question though. Is it safe for the bearings to put pressure on that stem?

It is the same load as the bike normally supporting its own weight. It is the type of front stand used by racers and pros everywhere. Use with confidence!

 

[kevoh]

so clutch im really lovin this forum right now

 

[flying dave]

I have a pit bull stand like the one in the link that I use on my zrx. I will need to try a different pin as the current one does not allow for clearance between the stand and the lower part of the headlight. Might order one for the grom and see if it works. YMMV....

 

[Greengoblin]

This is what I ended up buying for the front. It works well.

 

[flying dave]

What brand is that??

 

[Greengoblin]

What brand is that??

Trackside front paddock stand