Bazzaz/intake install-now won’t start - Kawasaki Z125 Forum
 1Likes
  • 1 Post By j r
 
LinkBack Thread Tools
post #1 of 4 (permalink) Old 10-12-2019, 01:43 PM Thread Starter
j r
Junior Member
 
Join Date: Oct 2019
Posts: 7
Bazzaz/intake install-now won’t start

Hi everyone . Installed M - Intake and Bazzaz EFI Thursday. Fired right up , check engine light, but ran it around neighborhood real quick . Ran great, more power 🙂 Friday morning , went to ride to work and no start. Cranks, won’t fire .

I’ve called vendor and Bazzaz customer service. I didn’t have much time with either so got same advice from both, but still no start . Both said to check connections, especially wire taps, injector connection, ground, and inline o2 sensor.

No go.

Bazzaz said to try plugging in stock injector line back in , and same , no start still .

Connected all stock connections back, and it still won’t start.

Any ideas , I’m stumped , and bummed .

Heading to go get jumper clip to check the codes .

Bike is 2019, has 160 miles on it. Got a new exhaust to slap on , and box of other parts but gonna wait til this is figured out .

Hoping it’s something simple. Any help greatly appreciated!
j r is offline  
post #2 of 4 (permalink) Old 10-12-2019, 03:09 PM
Senior Member
 
Kawasaki Brad's Avatar
 
Join Date: Feb 2017
Location: Stony Plain (West of Edmonton, Alberta, Canada)
Posts: 161
Garage
May have to bite the bullet and get it scanned for codes.

Does it have spark? May have fouled a plug running rich before the new 02/ECU "caught up".

Is the plug wet? After cranking it over for some time there should be some remnants of fuel in there. Can you confirm you're getting fuel?

Check the fuses. A few of my very frustrating troubleshooting missions have turned out to be a fuse that I didn't think was related.

Anything can kill you. Pick something fun.
kawasakibrad.com
Youtube Channel:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Kawasaki Brad is online now  
post #3 of 4 (permalink) Old 10-12-2019, 04:45 PM Thread Starter
j r
Junior Member
 
Join Date: Oct 2019
Posts: 7
Thanks for the ideas. Just pulled the codes using jumper . 6 slow blinks, 7 fast , and 1 slow 4 fast. ???

Looking then up now.

I’m gonna grab a spark plug puller in town in a few hours to check the plug for fouling/fuel.
j r is offline  
 
post #4 of 4 (permalink) Old 10-12-2019, 11:38 PM Thread Starter
j r
Junior Member
 
Join Date: Oct 2019
Posts: 7
Plug was fouled ! Cleaned the spark plug, Put on my new exhaust, pulled the plug for the 2nd map on the Bazzaz, and it fired right up. Took it for a spin and loved it . Thanks so much for the advice on the fouled plug.
Kawasaki Brad likes this.
j r is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome