Zaph's Kart Track Tool (build thread) - Page 11 - Kawasaki Z125 Forum
 20Likes
Reply
 
LinkBack Thread Tools
post #101 of 124 (permalink) Old 06-14-2019, 01:35 PM Thread Starter
Senior Member
 
Zaph's Avatar
 
Join Date: Feb 2017
Location: Appleton, WI
Posts: 509
This is just one of the Mobius cams I've had since 2013 or so. Still the old original V1 500mAh model. I'm due for a new one, was at least looking for a V3 820mAh. Didn't even know they made a 90 model. I assume it's the same, just 90 degree video.

That buymobius store looks like it's out of stock of everything but I'd stay away from ebay to avoid counterfeit models. Them and spytek I think are the only vendors I would trust.
Zaph is online now  
post #102 of 124 (permalink) Old 06-14-2019, 05:51 PM
Senior Member
 
Greg_E's Avatar
 
Join Date: Mar 2018
Posts: 835
Garage
Buymobius was really fast when I wanted to buy a couple of Mini's. Yes the 90 is just a Mobius 1 with the camera mounted 90 degrees rotation, wish they had the mini in a 90 version. The newest camera is the Mobius Maxi, which is sort of a Mini with a big battery, some internal parts have changed, but still the same resolution an back to the old style mounting (like the V1 but not exactly the same).

For $70 each the mini can get crushed and I won't cry too much (as long as I can get the SD card back and recover the crash footage). I made mounts out of aluminum that screw down to the mini and provide a much needed heat sink, as well as a bunch of 1/4-20 mounting points. I'll dig a picture out later.

My site:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Youtube channel:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Greg_E is offline  
post #103 of 124 (permalink) Old 07-11-2019, 09:16 AM
Junior Member
 
Join Date: Jul 2019
Posts: 7
Nice post. . .
BarrettGabriel is offline  
 
post #104 of 124 (permalink) Old 08-10-2019, 01:34 PM
Junior Member
 
Join Date: Aug 2019
Posts: 6
Great informatio !!
JonidaDevrishi is offline  
post #105 of 124 (permalink) Old 08-12-2019, 10:40 PM Thread Starter
Senior Member
 
Zaph's Avatar
 
Join Date: Feb 2017
Location: Appleton, WI
Posts: 509
I know! Thank you so much JonidaDevrishi and BarrettGabriel!

So, is there an actual moderator on this forum? Got some spammers sneaking through.
Zaph is online now  
post #106 of 124 (permalink) Old 08-13-2019, 10:29 AM
Senior Member
 
Ando's Avatar
 
Join Date: Aug 2018
Location: MN
Posts: 785
Garage
Nicest spammers I've ever met though! Most just want to hook up and turn out to be two dudes with baseball bats IRL.

Dropped a gear... . . . . . . . . . . ...still here
Ando is offline  
post #107 of 124 (permalink) Old 08-13-2019, 12:49 PM
Senior Member
 
Greg_E's Avatar
 
Join Date: Mar 2018
Posts: 835
Garage
I think a lot of people just want to inflate their post count so they can post pictures and links.

My site:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Youtube channel:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Greg_E is offline  
post #108 of 124 (permalink) Old 08-13-2019, 05:06 PM
Senior Member
 
Ando's Avatar
 
Join Date: Aug 2018
Location: MN
Posts: 785
Garage
Huh... interesting... They both posted 5 "+1" posts and then left a link for a locksmith, never to be seen again.

Have we given up on granting @Kaw'ee moderator powers?

Dropped a gear... . . . . . . . . . . ...still here
Ando is offline  
post #109 of 124 (permalink) Old 09-08-2019, 02:47 PM Thread Starter
Senior Member
 
Zaph's Avatar
 
Join Date: Feb 2017
Location: Appleton, WI
Posts: 509
Finally got the EBC rotor on with the Vesrah brake pads. Man, what an improvement. The Vesrah pads are great. We need to sellers in the states for these.

Until today I never figured out why the Galfer rotor pulsated, even though it was not warped and had fine runout numbers. But when I took it off and inspected it, I saw why. It was fully flat but had a pretty bad manufacturing defect on one side. One outside portion of the rotor near the edge was milled a couple thousandths lower that the rest of the rotor, causing less contact area along one portion of the rotor. If I had been more thorough in my runout tests and checked right along the edge I would have found it.

So ultimately it was a quality problem by Galfer. Going to stick with EBC rotors, I've used them on several other bikes and I believe they are better quality.
Zaph is online now  
post #110 of 124 (permalink) Old 09-10-2019, 07:57 AM Thread Starter
Senior Member
 
Zaph's Avatar
 
Join Date: Feb 2017
Location: Appleton, WI
Posts: 509
My last ride around the USAIR kart track in Shawano WI. It was a little cool out so I couldn't rail corners too hard but still fun.

https://vimeo.com/358960834

Some of you guys may be jealous at the size of this kart track.
Zaph is online now  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
TheSighBored's not really a build thread thesighbored Kawasaki Z125 Builds And Showcase Area 16 11-07-2017 02:01 AM
Converting my Z125 into a scrambler build thread monmendoza Appearance & Modifications 27 06-30-2017 10:39 PM
Jetta's build thread Jetta Kawasaki Z125 Builds And Showcase Area 13 12-01-2016 03:42 PM
Tool Kit + Torque Wrench? _mgerber_ Kawasaki Z125 How To And DIY 2 11-23-2016 09:56 PM
Z125 On Track KawiGirl Kawasaki Z125 Pictures And Videos 11 03-03-2016 06:31 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome