Just a Z125 to put some parts on - Kawasaki Z125 Forum
 
LinkBack Thread Tools
post #1 of 8 (permalink) Old 03-15-2018, 06:30 PM Thread Starter
Member
 
Join Date: May 2017
Location: The DMV
Posts: 54
Just a Z125 to put some parts on

Hey there everyone. I figure since I'm starting to put in some work on this little bike, I should document it. I got a big box in from MNNTHBX yesterday, got home and started some installations.

My first set of installs will be:
ASV Levers
MNNTHBX fender eliminator w/ integrated tail light
Driven Rearsets
OTB Chain Adjusters w/ spools
Hindle Evo

The levers went on very easily and I love the quality. Just need to figure out how I actually want them.
Taillight was pretty easy following the provided instructions. I picked up a few things today to use installing the fender eliminator and various other things. I bought some nylon washers to put between the bolt heads and the finished plate mount just to keep it from getting scratched up too much. Along with some Loctite and white lithium grease, I should be good to go for a bit.

I'll try to keep this updated as I get things done. I have a big list to work on!


BTW: HUGE shout out to MNNTHBX. I placed the order with them and the parts were at my door 2 mornings later. Thanks guys!
Attached Thumbnails
Click image for larger version

Name:	20180315_091735.jpg
Views:	126
Size:	241.1 KB
ID:	16178   Click image for larger version

Name:	20180315_091744.jpg
Views:	124
Size:	192.9 KB
ID:	16186   Click image for larger version

Name:	20180315_091803.jpg
Views:	114
Size:	174.1 KB
ID:	16194   Click image for larger version

Name:	20180315_091815.jpg
Views:	111
Size:	201.4 KB
ID:	16202  
sliptones629 is offline  
post #2 of 8 (permalink) Old 03-19-2018, 01:09 PM Thread Starter
Member
 
Join Date: May 2017
Location: The DMV
Posts: 54
I got everything on over the weekend. I just need to get the footpegs, shifter, etc exactly where I want them before I loctite everything down. I got some nylon washers for the undertail hardware for .25c each. I can't wait to get more done on this thing! Well, AND to go riding!!!!
Attached Thumbnails
Click image for larger version

Name:	20180315_203122.jpg
Views:	86
Size:	190.9 KB
ID:	16458   Click image for larger version

Name:	20180315_213538.jpg
Views:	82
Size:	192.7 KB
ID:	16466   Click image for larger version

Name:	20180315_203229.jpg
Views:	87
Size:	118.3 KB
ID:	16474   Click image for larger version

Name:	20180317_195020.jpg
Views:	75
Size:	97.3 KB
ID:	16482   Click image for larger version

Name:	20180317_195029.jpg
Views:	72
Size:	59.9 KB
ID:	16490  

Click image for larger version

Name:	20180317_195037.jpg
Views:	89
Size:	107.4 KB
ID:	16498  
sliptones629 is offline  
post #3 of 8 (permalink) Old 03-19-2018, 01:34 PM
Senior Member
 
Kaw'ee's Avatar
 
Join Date: Dec 2017
Posts: 1,603
Garage
Quote:
Originally Posted by sliptones629 View Post
.
I got everything on over the weekend.
.
Still getting or got the Hindle evo ?


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Kaw'ee
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Kaw'ee is online now  
 
post #4 of 8 (permalink) Old 03-19-2018, 03:15 PM Thread Starter
Member
 
Join Date: May 2017
Location: The DMV
Posts: 54
Quote:
Originally Posted by Kaw'ee View Post
.
Still getting or got the Hindle evo ?
Aaaaaactually, I do have it. The first one like it (with a carbon cap) as well

I was going to wait to at least get a intake for it and maybe a fuel controller as well. All I did so far was remove the screen from the factory filter/airbox.

What I feel like I really need to do is get better tires and braking next. Not to mention the Ohlins kits.
Attached Thumbnails
Click image for larger version

Name:	IMG953148.jpg
Views:	89
Size:	76.6 KB
ID:	16522   Click image for larger version

Name:	IMG953149.jpg
Views:	90
Size:	80.5 KB
ID:	16530   Click image for larger version

Name:	IMG953150.jpg
Views:	89
Size:	64.0 KB
ID:	16538  
sliptones629 is offline  
post #5 of 8 (permalink) Old 03-19-2018, 03:39 PM Thread Starter
Member
 
Join Date: May 2017
Location: The DMV
Posts: 54
Forgot the pic without the silencer installed. I've had it out of the box at least....TWICE!
Attached Thumbnails
Click image for larger version

Name:	IMG953151.jpg
Views:	85
Size:	83.5 KB
ID:	16554  
sliptones629 is offline  
post #6 of 8 (permalink) Old 03-19-2018, 04:02 PM
Senior Member
 
Kaw'ee's Avatar
 
Join Date: Dec 2017
Posts: 1,603
Garage
If you can post a pic' straight-on and at level when you get it on that would be great . I was going with the hindle at first because it was tucked up under the case and then u-bend at pegs . but then they came out with the new design and the whole pipe looks lower and level to the case and looks like a longer can .so wont work for my needs now if thats the case. thanks
.
Great to see it in black now !!!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Kaw'ee
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Kaw'ee is online now  
post #7 of 8 (permalink) Old 03-19-2018, 06:10 PM Thread Starter
Member
 
Join Date: May 2017
Location: The DMV
Posts: 54
Quote:
Originally Posted by Kaw'ee View Post
If you can post a pic' straight-on and at level when you get it on that would be great . I was going with the hindle at first because it was tucked up under the case and then u-bend at pegs . but then they came out with the new design and the whole pipe looks lower and level to the case and looks like a longer can .so wont work for my needs now if thats the case. thanks
.
Great to see it in black now !!!
I can do that when I get it on.

The one I have is the one like the picture I will post along with this. I've had it since I got the bike last May. Luckily my dad used to race with Hindle back in the day so they are still good friends.
Attached Thumbnails
Click image for larger version

Name:	hindle-75-0107.jpg
Views:	81
Size:	292.8 KB
ID:	16562  
sliptones629 is offline  
post #8 of 8 (permalink) Old 03-19-2018, 07:16 PM
Senior Member
 
Kaw'ee's Avatar
 
Join Date: Dec 2017
Posts: 1,603
Garage
Wow ..... that looks nice ! ... its the new Low' design but I might just say fudge it and get that one .
.
I'm waiting for a reply on a custom up-pipe but i've only got a reply from his buddy vinny that says he would get with his friend (dagner) so far , but hes not in much of a hurry as I am .


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Kaw'ee
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by Kaw'ee; 03-19-2018 at 07:21 PM.
Kaw'ee is online now  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
New look for the new year.....and a few more parts Bryan Krae Kawasaki Z125 Pictures And Videos 5 02-08-2018 08:57 PM
Where can buy parts of z125 in banokok? Gilbertchow Kawasaki Z125 General Discussion 1 10-19-2016 02:20 PM
Z125 parts fiche flying dave Kawasaki Z125 General Discussion 4 09-15-2016 01:00 AM
New Parts! !!!!!! MichaeldPayton Z125 Parts & Accessories 0 06-28-2016 11:30 PM
Yoshimura Now Has Z125 Parts FangShui Appearance & Modifications 6 05-15-2016 08:06 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome