AEM wideband sensor - Kawasaki Z125 Forum
LinkBack Thread Tools
post #1 of 3 (permalink) Old 12-15-2018, 01:16 PM Thread Starter
Junior Member
Join Date: Dec 2018
Posts: 1
AEM wideband sensor

I'm trying to install the AEM wideband sensor I'm getting power and the gauge is working but I need it to run through the hoedar ecu
Justin Stafford is offline  
post #2 of 3 (permalink) Old 10-19-2019, 12:46 PM
Junior Member
Join Date: May 2018
Posts: 7
The AEM Controller have Analog Output Positive and Negative pin ,you should wire it to original O2 connector.
iskyro is offline  
post #3 of 3 (permalink) Old 10-21-2019, 10:37 AM
Senior Member
crakerjac's Avatar
Join Date: Oct 2017
Location: Minnesota
Posts: 652
The origional post is almost a year old... IIRC, Justin reached out to me on Facebook and we got this sorted out. You can wire in the AEM/LC-2 Wideband sensor directly into the stock O2 sensor plug. Only extra wire is ground either directly to the battery.

I ran the ground back to the battery, but during my install, I saw that the ground battery lead runs to the bike frome right behind the O2 sensor plug. I could have tied in there, but I already had everything cut and soldered to length.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

[This space for rent]
crakerjac is online now  

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Similar Threads
Thread Thread Starter Forum Replies Last Post
Any brand loop exhaust with wideband bung installed Ralph Pootawn Want to Buy 0 11-28-2018 07:48 PM
Bad wideband o2? vladtheimapler Electronics 7 07-29-2018 10:32 AM
O2 sensor? dodge Engines Discussions 7 10-22-2016 11:37 PM
Wideband Tuning Info Here Zmike125 Kawasaki Z125 How To And DIY 5 07-20-2016 08:19 PM
looking for a o2 sensor skyler Kawasaki Z125 Owners Registry And Check In Area 0 07-07-2016 08:37 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome